Assembly guide

One person. No tools. Five to thirty minutes.

Everything you need to assemble your system, step by step. Watch the video, or download the guide and keep it beside you.

Level the baseLay the first board on the floor. On an uneven floor, level it with shims (not included).
Place the modulesSame height and depth in each row, fully seated, gaps of 23″ or less. Bridge every joint between boards.
Hold both endsSet a module near each end, then lower the next board straight down onto them.
Repeat to the topRow by row. With two depths, build the deep rows first.

Three things to keep in mind.

Fits top and bottom

Each module fits into the board below and the board above.

Within the board

Keep every module inside the ends of its board, never on the edge.

Anchoring

Anchor installations over 8 ft to the wall with standard hardware (not included).

Something doesn't feel right? Never force a piece. Send us a photo of the row and we'll help.